Teflon ┃PTFE┃ Sheets, Rods, Gaskets, Tubing_Beluns® Plastic

Polytetrafluoroethylene (PTFE), Its mechanical properties are low compared to other engineering plastics, but its properties remain at a useful level over a great temperature range — from -400 to 500°F (-240 to 260°C). PTFE has excellent thermal and electrical insulation properties. And, it has a low coefficient of friction. It is difficult to make anything adhere to PTFE. A material may stick to it, but the material can be peeled off or rubbed off. PTFE was the first fluorocarbon. It is the most chemically resistant plastic known. Mechanical properties can be improved by the addition of fillers such as glass fiber, carbon, graphite, molybdenum disulfide and bronze. And Beluns Plastic Had PTFE Sheet, PTFE Rod, PTFE Gasket, Fills PTFE, PTFE Tubing, PTFE Parts,etc.
PTFE SHEETS, TEFLON SHEET
 Teflon (PTFE) Sheets ■ Beluns ® PTFE Sheet
 PTFE Sheets (63)
PTFE RODS, TEFLON ROD,
 Teflon (PTFE) Rods ■ Beluns ® PTFE Rod
 PTFE Rods (56)
PTFE GASKETS, TEFLON GASKET
 Teflon (PTFE) Gaskets ■ Beluns ® PTFE Gasket
 PTFE Gaskets (58)
HOSE PTFE TUBE, PTFE PIPI, PTFE BUSHES
 Teflon (PTFE) Tubes ■ Beluns ® PTFE Tube | Hose | Bushes | Pipe
 PTFE Tubes (8)
PTFE FILLS
 PTFE  Fills ■ Beluns ® Graphite | Bronze | GlassFiber | Mos2 | Filled PTFE
 PTFE Fills (15)
PTFE PARTS
 Teflon (PTFE) Parts ■ Beluns ® PTFE
 PTFE Parts (90)

PTFE (Size)
 
· PTFE Sheets: Thickness 0.1 upto 100mm; W*L 1*1M, 1.5*1.5M, 1*2M, 2*2M and Rolls. According to customer requirements
· PTFE Rods: Dia 3mm upto 1000mm, L 100, 300, 500, 1000mm, 2000mm.  According to customer requirements
· PTFE Tubes: According to customer requirements
· PTFE Gasket: OD 10 upto 2000mm, ID 5mm upto 1500mm, Thickness 0.5mm upto 100mm. According to customer requirements

PTFE Feature
  • Advantages of Virgin PTFE material:
  • Unaffected by almost all chemicals
  • Continuous use at high temperatures
  • Slippery non-stick surface
  • Outstanding dielectric properties
  • Improved resistance to cold flow or creep
  • Reduction in Wear and Friction
  • Improved dimensional stability
  • Increased stiffness and surface hardness