Poly ether ether ketone (PEEK) Rod is a high performance semi-crystalline, engineering thermoplastic. has attractive properties like good abrasion resistance, low flammability and emission of smoke and toxic gases, resistance to radiation and high temperature steam, and low water absorption.
 
 
PEEK RODS (Size)
 
PEEK ROD
PEEK ROD
DIA (mm) Tolerance Standard (mm) PEEK ROD (kg)    
3 0.2
0.4
0.010    
5 0.027    
6 0.2
0.4
0.038    
8 0.068    
10 0.2
0.6
0.106    
12 0.153    
15 0.239    
20 0.2
1.0
0.424    
25 0.663    
30 0.954    
35 0.2
1.5
1.299    
40 1.696    
45 2.147    
50 2.651    
55 0.3
2.0
3.207    
60 3.817    
65 4.480    
70 5.195    
75 5.964    
80 6.786    
85 7.661    
90 8.588    
95 0.4
3.5
9.569    
100 10.603    
110 12.829    
120 15.268    
130 17.919    
140 0.5
4.5
20.782    
150 23.856    
         
         
Remark:
1. Tolerance is according to DIN Length: 0~3 %, width: 0~ 3%.
2. it is theoretical value for above spec, with the  Length 1000mm
3. Taking objective as standard, listed data are for reference only.
4. The products above have been strictly treated with tempering; the strain value has met the minimum.

PEEK Feature
  • Excellent high temperature performance
  • Chemical and wear resistance
  • Biocompatible
  • It has a tensile strength of 90 to 100 MPa
  • It melts at around 343°C (higher than the melting point of PTFE or PPS)and can be used in high continuous service temperature at 260°C
  • Highly resistant to thermal degradation as well as attack by both organic and aqueous environments
  • PEEK is inherently pure