Nylon Rod (MC) Rods ┃_Beluns® Plastic
 
Polyamides (Nylon / PA) Rods: Nylon has very good temperature, chemical, and impact properties. Parts machined or fabricated from nylon are light weight and corrosion resistant. Low friction, good abrasion resistance and the ability to operate without lubrication, qualify the nylons for such applications. Parts machined or fabricated from cast nylon are light weight and corrosion resistant. In addition, cast nylon's excellent load bearing capability, wear resistance and impact resistance make it ideal for demanding construction environments. Nylon rod which has not been compounded with UV stabilizers are sensitive to ultraviolet light. These compounds should not be used for extended outdoor service. Carbonblack (our black Nylon) is the most effective of the UV stabilizers. These additives also increase tensile strength and hardness and decrease ductility and toughness slightly. Beluns Factory Had Nylon GlassFiber Rod, Natural Nylon Rod, Blue Nylon Rod, Anti Static (ESD) Nylon Rod, Eeletric Conductive Nylon Rod, MC Nylon Rod, MC OIL Nylon Rod, MC R2 Nylon Rod, MC 901 Nylon Rod, Nylon 66 Rod, Nylon 6 Rod, Nylon Rod, etc.
 
NYLON RODS (Size)
 
NYLON 6, 66, PA RODS
Nylon (PA) ROD
DIA (mm) Tolerance Standard (mm) Nylon Anti Static Rod (kg) Nylon Conductivity Rod (kg) NYLON 6/ 66 ROD/ MC / Casting (kg)
3 0.2
0.4
0.008 0.009 0.008
5 0.022 0.024 0.023
6 0.2
0.4
0.032 0.035 0.033
8 0.056 0.062 0.058
10 0.2
0.6
0.088 0.097 0.090
12 0.127 0.140 0.130
15 0.198 0.219 0.203
20 0.2
1.0
0.352 0.390 0.361
25 0.550 0.609 0.565
30 0.792 0.877 0.813
35 0.2
1.5
1.078 1.193 1.106
40 1.407 1.558 1.445
45 1.781 1.972 1.829
50 2.199 2.435 2.258
55 0.3
2.0
2.661 2.946 2.732
60 3.167 3.506 3.252
65 3.717 4.115 3.816
70 4.310 4.772 4.426
75 4.948 5.478 5.081
80 5.630 6.233 5.781
85 6.355 7.036 6.526
90 7.125 7.889 7.316
95 0.4
3.5
7.939 8.789 8.151
100 8.796 9.739 9.032
110 10.644 11.784 10.929
120 12.667 14.024 13.006
130 14.866 16.459 15.264
140 0.5
4.5
17.241 19.088 17.703
150 19.792 21.913 20.322
         
         
Remark:
1. Tolerance is according to DIN Length: 0~3 %, width: 0~ 3%.
2. it is theoretical value for above spec, with the  Length 1000mm
3. Taking objective as standard, listed data are for reference only.
4. The products above have been strictly treated with tempering; the strain value has met the minimum.

Nylon (PA) Rod Feature
  • Maximum Single Rod Length: 10ft
  • Good abrasion and wear resistance
  • Continuous use temperature of 220°F
  • Very easy to fabricate
  • Outstanding chemical resistance to alkalies and oxidizing agents
  • High strength and stiffness at elevated temperatures
  • Light weight (approx. 1/8 vs. bronze)
  • Good impact strength at low temperature
  • Low friction coeficient